{"id":2319,"date":"2019-04-15T07:12:40","date_gmt":"2019-04-15T07:12:40","guid":{"rendered":"http:\/\/www.sipotek.net\/?p=2319"},"modified":"2019-04-15T07:12:40","modified_gmt":"2019-04-15T07:12:40","slug":"an-introduction-of-sipotek-optical-sorting-segregation-machine","status":"publish","type":"post","link":"https:\/\/www.sipotek.net\/an-introduction-of-sipotek-optical-sorting-segregation-machine\/","title":{"rendered":"An Introduction of Sipotek Optical Sorting\/Segregation Machine"},"content":{"rendered":"
An Introduction of Sipotek Optical Sorting Machine<\/a><\/b><\/u><\/strong><\/p>\n 1.Machine Configuration<\/b><\/strong><\/p>\n 1.1<\/b><\/strong>\u00a0\u00a0System configuration<\/b><\/strong><\/p>\n Picture 1-1 shows the complete frame of our\u00a0inspection system<\/a>. The whole machine is mainly composed of\u00a0the overall frame structure,\u00a0the Internal Host, the Light Source Controller, the Plc Control System, the Servo Motor, the Rotary Carrier, the Camera Bracket, the Image Acquisition Device and the Display Screen.<\/p>\n <\/p>\n Picture 1-1 Sipotek Inspection Machine<\/a><\/b><\/strong><\/p>\n <\/p>\n 1.2 The Feeding Structure<\/b><\/strong><\/p>\n We use the vibration feeder (Picture 1-2) to make objects ready and keep consistent for the next action. Then they will be carried to the rotary glass plate and reach a specific position for image processing.<\/p>\n <\/p>\n Picture 1-2 The Vibration Feeder<\/b><\/strong><\/p>\n 1.3 The Rotary Carrier<\/b><\/strong><\/p>\n The rotary carrier (Picture 1-3) is also called a glass turntable plate. When the objects-to-be-inspected are carried through the vibration feeder to the rotary plate, they will be took photos by specific cameras in different position. Then the collect imaging data will be transmitted to the upside host computer software system and will be processed and evaluated with results, which will be transferred to the downside Plc control system that will take the sorting action via the nozzle to dived good or negative objects.<\/p>\n <\/p>\n Picture 1-3 The Rotary Carrier<\/p>\n As picture 1-3 shows, there are specific positions setting around the rotary carrier, where the cameras standby to take clear images under correct lighting source.<\/p>\n <\/p>\n 1.4 Downside Control System<\/b><\/strong><\/p>\n The picture 1-4 shows the downside control system, including Plc controller, Servo motor drive, the Host, Power Source, the Servo motor and etc.<\/p>\n <\/p>\n <\/p>\n Picture 1-4 The Downside Control System<\/b><\/strong><\/p>\n \u00a0<\/b><\/strong><\/p>\n In the working process, through specific operation of the upside control interface delivering actions to the downside Plc control system, the whole downside control system can adjust the turntable motion\u00a0(forward rotation, reverse rotation, speed-change). Meanwhile the cameras are triggered by photoelectric sensor. A trigger signal is transmitted to Plc. Base on the time need for objects carrying to different camera positions, the Plc will finally determine the trigger time need for different cameras.<\/p>\n Above mentioned is\u00a0a\u00a0brief\u00a0introduction\u00a0of\u00a0our\u00a0Optical sorting machine\u00a0structure.<\/p>\n <\/p>\n 2. Software Functions<\/b><\/strong><\/p>\n Currently our optical sorting machine<\/a> can achieve inspections\u00a0as below:<\/p>\n All details above are the functions of our optical sorting machine. Some functions can be achieved by using the above mentioned software system. Including dimensional measurement (Circle inner and outer diameter, regular circle length\/width, step height, step width), screw inner and outer dimension measurement, gearwheel\/gear head\/circle thread\/root measurement, burrs inspection, surface dust, product completion detection (edge broken, part missing), surface scratches detection, character recognition, character inspection and etc.<\/p>\n <\/p>\n Through our inspection software system with combination of these functions, our optical segregation machine can achieve more functions on images-processing, inspection, measurement and recognition.<\/p>\n \u00a0<\/b><\/strong><\/p>\n About Shenzhen Sipotek Technology Co., Ltd<\/strong><\/p>\n <\/p>\n Started in 2002,\u00a0Sipotek<\/a>\u00a0Technology is located in Shenzhen in China. The company designs and\u00a0manufactures visual inspection systems<\/a>\u00a0with its avant-garde R&D department and a great experience in artificial vision technologies. The Sipotek Technology staff supports customers 360 degrees\u00a0automatd optical inspection(AOI)<\/a>, from listening to their requests to the development of ambitious machines for quality control.<\/p>\n <\/p>\n For Product Inquiries:<\/p>\n Contact Person: James Yuan<\/p>\n Company:\u00a0Shenzhen Sipotek Technology Co., Ltd<\/a><\/p>\n Tel: 86-755-36994123<\/p>\n\n
\n