{"id":3001,"date":"2020-02-20T15:01:50","date_gmt":"2020-02-20T15:01:50","guid":{"rendered":"http:\/\/www.sipotek.net\/?p=3001"},"modified":"2020-02-20T15:01:50","modified_gmt":"2020-02-20T15:01:50","slug":"why-we-need-to-buy-automatic-vision-inspection-machine","status":"publish","type":"post","link":"https:\/\/www.sipotek.net\/why-we-need-to-buy-automatic-vision-inspection-machine\/","title":{"rendered":"Why we need to buy automatic vision inspection machine?"},"content":{"rendered":"
<\/p>\n
The automatic vision inspection machine<\/b><\/strong><\/a>\u00a0is highly demanded. This machine is used by many electronic components manufacturing enterprises, while in QC inspection<\/a> many people use this machine for product quality controlling so that they can reduce the product quality problems and enhance the customers trust. Any one can use this machine after a simple training.<\/p>\n The automatic vision inspection machine<\/b><\/strong>\u00a0has high inspection speed and accuracy. When you put the product on the inspection platform, it can automatic inspection and sort out the bad products without any product damage. In the meantime, this automatic vision inspection machine<\/b><\/strong>\u00a0also provide dimension measurement and automatic counting function.<\/p>\n In the process of production,because of the long hours of work, workers tend to feel tired, so it is not guaranteed that all products are in the same standard. Especial in the electronic component industry, it requires a vast production and higher accuracy. When the product quality cannot meet the production requirement, it will cause many waste and let the factory falls into the customer trust crisis. At this time, factories mostly need automatic vision inspection machine<\/b><\/strong>.<\/p>\n With 1.3 million pixel SONY industrial camera and up to 2000 pieces per minute inspection speed, this automatic inspection machine<\/b><\/strong>\u00a0is the right choice for those who want perfect product quality and save cost.<\/p>\n PERSONAL EXPERIENCE:<\/b><\/strong><\/p>\n We are automation builder in Singapore.\u00a0The metal stamped parts are our main products, we need to product 5-10 millions of parts every month. The size of metal stamped part is less than 7mm which is prone to deformation and burr in the production process. It is hard to sort out by human eyes, i was quite troubled and really long for a machine to solve this problem. Until i find a machine from Shenzhen Sipotek Technology Co.,Ltd.<\/b><\/strong>\u00a0by accident.<\/p>\n I sent the inspection requirements and samples to the seller, then i received a test report from them after 3 days. The report analyzed the lighting results in details and provided the basic machine specification need. After the machine was finished as required, i took a trial and was surprised to found that the acceptance rate of qualified product was over 99%.<\/p>\n