Vision inspection solution is a project designed from vision inspection manufacturers or designers for customers to get better understanding of they requirements of inspection contents, speed per minute, accuracy and inspection platform. It will provide a machine 3D structure or design picture for customers. Before we can test the samples and make the solution, customers will provide enough details in advance.
inductance element
Automatic vision inspection are almost non-customized standard for different companies. To custom-make a suitable vision inspection machine, our company will need to make preparations for doing an inspection solution.
Inspection product models
How many model products should be inspected in one machine? Basically according our experience, a machine can inspect maximum 3 models with similar features. That means you can not use an apple inspection machine at the same time inspect the peanuts. But you can use it to inspection apple A, apple B or apple C.
Inspection dimensions
Size / Dimension measurement is one the the regular vision inspection task for machine vision. Many items should have critical size control. The drawings will be provide to our engineers for evaluation. Remember it must have highlighted marks showing which sizes should be measured.
Not good samples
For defective inspection ,also called surface defects, appearance, or cosmetic defects, we usually ask customer to provide 6-10 pcs of each defects.
Defects No.1…Defects No.2… Defects No.3…..
All the defects must be described clear in what position they will appear, because the solution will be based on them.
Pictures of defective samples
Some customer will forget to separate the defective samples. It will delay the time for testing. If customer can provide the pictures of the defective samples, it will help us separate the massive samples faster. But the best way is that customer separate their samples on their own because they are the one who knows the defects degree. Sometimes the minimum size of defect is the limits for a vision inspection software to set the templates.
Good samples
We also need good samples to do the master templates. For dimensional inspection only, the customers only need to provide good samples. But for defective inspection, bad and good samples are both needed. They have to make comparison.
Product features
The products will be put onto an inspection stationary for inspection. The stationary will be either a glass or a transparent conveyor belt and will work continuously hours. So we have to consider the features when products be placed in the the environment. Will they be fragile, get dirty, or get scratched, oily, etc.
About us Shenzhen Sipotek Technology Co., Ltd
Established in 2002, Sipotek Technology is located in Shenzhen in China. The company designs and manufactures visual inspection systems with its avant-garde R&D department and a great experience in artificial vision technologies. Sipotek is a professional machine vision inspection system manufacturer from china.The Sipotek Technology staff supports customers 360 degrees automatd optical inspection(AOI), from listening to their requests to the development of ambitious machines for quality control.
For product inquiries: Contact Person: James Yuan
Company: Shenzhen Sipotek Technology Co., Ltd
Tel: +86-18617182707
Email: [email protected]
Website: http://www.sipotek.net/
Website: https://www.topvision.net
